BTA Heller
drilling systems
Solid Drilling
Trepanning
Internal Profiling
Skiving & Burnishing
Form Tools
Gun Drills
drilling Accessories
Premium Oils
Counter Boring
Contact Us
Home


Ejector Drills
Ejector Drills

Ejector Drills

What is an Ejector Drill?

An ejector drill uses a specially designed carbide cutter at the point. The drill body is essentially a tube within a tube.

Used almost exclusively for deep hole drilling of medium to large diameter holes (about 3/4" up to about 4" diameter). An ejector drill uses a specially designed carbide cutter at the point. The drill body is essentially a tube within a tube. Flushing water travels down between the two tubes. Chip removal is back through the center of the drill.

Drill bits are cutting tools used to create cylindrical holes. Bits are held in a tool called a drill, which rotates them and provides torque and axial force to create the hole. Specialized bits are also available for non-cylindrical-shaped holes.

The term drill can refer to a drilling machine, or can refer to a drill bit for use in a drilling machine.

Ejector drills can be used on a variety of machining and turning centers equipped with sufficient high pressure coolant and filtration systems. These tools and this system allow depth to diameter ratios in excess of 100x's dia. BTA Heller offers several different carbide grades, coating and grind options.

BTA Heller sells ejector drills in diameter ranges from 0.055" to 2.0".


Gundrilling | Single Tube Systems | Double Tube Systems | Solid Drilling | Trepanning | Counter Boring / Reaming
Skiving & Burnishing | Form Tools | Gun Drills | Ejector Drills | Drilling Accessories | Premium Oils | Internal Profiling | Contact Us | Home | Site Map

© 2018 BTA Heller a Division of Sunnen
Site design and hosting by VR Metro LLC